IP 66, Optional: IP 67
handCASE is a stylish and highly robust range of handheld enclosures in diecast aluminium. Thanks to their ergonomic design these enclosures sit very comfortably in the hand. The high strength of handCASE provides solid protection for internal electronics and components under the most extreme conditions.
The enclosures are tested to IP 66 protection class and are available with or without battery compartments for 1.5V AA and 9V cells. Threaded screw bosses are provided inside for fitting circuit boards, mounting plates etc. Cable glands and other accessories are also available.
We can supply handCASE enclosures fully customised to your requirements.
Type | Part No. | Length | Width | Height | Weight (g) | Battery compartment | Download | 3D-Model-Download | Add to my list | |
---|---|---|---|---|---|---|---|---|---|---|
![]() |
HCF 080 | 270.080.000 | 180 | 80 | 42.4 | 450 | o | Download |
![]() |
![]() |
![]() |
HCF 081 | 270.081.000 | 180 | 80 | 42.4 | 430 | - | Download |
![]() |
![]() |
![]() |
HCF 100 | 270.100.000 | 220 | 100 | 42.4 | 600 | o | Download |
![]() |
![]() |
![]() |
HC 100 | 271.100.000 | 220 | 100 | 62.4 | 660 | - | Download |
![]() |
![]() |
Part No. | Length | Width | Height | Add to my list | |
---|---|---|---|---|---|
![]() |
270.080.000 | 180 | 80 | 42.4 |
![]() |
![]() |
270.081.000 | 180 | 80 | 42.4 |
![]() |
![]() |
270.100.000 | 220 | 100 | 42.4 |
![]() |
![]() |
271.100.000 | 220 | 100 | 62.4 |
![]() |
Type | Part No. | Length | Width | Height | Weight (g) | Battery compartment | Download | 3D-Model-Download | Add to my list | |
---|---|---|---|---|---|---|---|---|---|---|
![]() |
HCF 080 R | 272.080.000 | 180 | 80 | 42.4 | 450 | o | Download |
![]() |
![]() |
![]() |
HCF 081 R | 272.081.000 | 180 | 80 | 42.4 | 430 | - | Download |
![]() |
![]() |
![]() |
HCF 100 R | 272.100.000 | 220 | 100 | 42.4 | 600 | o | Download |
![]() |
![]() |
![]() |
HC 100 R | 273.100.000 | 220 | 100 | 62.4 | 660 | - | Download |
![]() |
![]() |
Part No. | Length | Width | Height | Add to my list | |
---|---|---|---|---|---|
![]() |
272.080.000 | 180 | 80 | 42.4 |
![]() |
![]() |
272.081.000 | 180 | 80 | 42.4 |
![]() |
![]() |
272.100.000 | 220 | 100 | 42.4 |
![]() |
![]() |
273.100.000 | 220 | 100 | 62.4 |
![]() |
GOST
4 versions, 2 lid variants
Dimensions L x W x H
80 x 180 x 42.4 mm to 100 x 220 x 62.4 mm
Integrated recess in the lid for membrane keypad or front plates
Ergonomic design for non-fatiguing work
Alternative lid design for all enclosure sizes
Optional: Battery compartment made from ABS for 2 versions
Die-cast aluminium allow:
EN AN-44300 DIN EN 1706
(GD Al Si 12/DIN 1725).
1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom
Optional: Holding clip (e.g. for strap)
Optional: Wall bracket for clip fastening
Optional: Carrying strap with protector
M3 fastening thread on the enclosure base and in the lid
IP 66 / EN 60529
Optional: IP 67 / EN
Free-fall DIN EN 60068-2-32
TPE moulded gasket, silicone-free, temperature resistance: -40°C to +120°C
Stainless steel 1.4567, captive
Powder coating
Lid: Silver metallic
Bottom: RAL 9005, deep black
Optional: Special colours
Learn more about our full customising service for installation-ready enclosures
Ingress protection
Lid screws
1. Use the advanced search feature, to find the right product.
2. Take a look at our articles and detailed technical information and add the articles and accessories you need to your “MY LIST” by clicking the "Add to my list" button on an article page.
3. Using the menu item “MY LIST” you can check the items on the list, modify and submit it to our enclosures specialists.